How to Reduce Evaporation, Retain Heat and Protect Wildlife in Mining Ponds and Tailings

Water is the quiet constraint on almost every mining operation. Whether you run a copper concentrator in the Atacama, a gold heap-leach pad in Nevada, or a process circuit at altitude in the Andes, the volume of water you can secure, reuse, and account for often decides how much ore you can move. And yet across the industry, enormous volumes of that water sit exposed to the open air in process ponds, raw-water reservoirs, and storage basins, evaporating into the sky, growing algae, and drawing birds that no environmental team wants to see near a cyanide or acidic solution.
Modular floating covers address all three problems at once, with a single physical layer placed on the water surface. This article explains how they work, where they deliver the most value in a mining operation, and what to look for when evaluating them.
The evaporation problem is bigger than it looks
In arid mining regions, evaporation losses from an uncovered pond can reach 2,000 to 3,500 millimeters per year. For a one-hectare pond, that is on the order of 20 to 35 million liters lost annually, water you paid to pump, treat, or buy, vanishing without doing any work. In regions where mines operate under strict extraction permits or compete directly with agricultural and community users for the same basin, every cubic meter recovered has both a hard cost and a social-license dimension.
A floating cover works by physically separating the water surface from the dry, moving air above it. Evaporation is driven by the vapor-pressure gradient between the water surface and the air, and by wind that carries saturated air away and replaces it with dry air. A cover interrupts both mechanisms: it shades the surface, lowering surface temperature and the vapor pressure that drives evaporation, and it traps a thin saturated boundary layer that the wind can no longer strip away. By blocking these pathways, a high-coverage modular system can cut evaporation by up to 97%, depending on configuration and climate. The water you would have lost stays in the circuit, available for reuse.
Heat retention in leaching circuits
Many hydrometallurgical processes are temperature-sensitive. Leaching kinetics slow as solution temperature drops, and in high-altitude or cold-climate operations, overnight heat loss from exposed ponds can measurably reduce recovery efficiency. The dominant pathway for that heat loss is, again, the surface: evaporative cooling and radiative loss both happen at the water-air interface.
A floating cover acts as an insulating blanket, reducing both the evaporative and the radiative heat loss from the solution surface. Keeping pregnant or barren leach solutions warmer for longer can translate directly into improved metallurgical performance, faster kinetics, higher recovery, or the ability to maintain target temperatures with less supplementary heating. This is a benefit that is easy to overlook when covers are framed only as a water-saving measure, but for temperature-sensitive circuits it can be the larger of the two values.
Wildlife exclusion and the auditability question
Open process water is an attractant. Birds and other wildlife landing on solution ponds is a recurring compliance and reputational risk, particularly where solutions contain cyanide, sulfuric acid, or dissolved metals. Bird mortality events on mining ponds have triggered regulatory action and reputational damage across the industry. Netting is one answer, but it sags, requires structural support across large spans, does nothing about evaporation or algae, and can itself entangle wildlife if poorly maintained.
A modular floating cover provides a continuous physical barrier across the surface. Crucially for mining, a well-engineered modular system is auditable: coverage is measurable, the installation is documented, and the barrier's presence can be demonstrated to regulators and to community stakeholders as a concrete, verifiable commitment rather than a promise. In jurisdictions where evaporation reduction and water stewardship are written into environmental commitments or community water agreements, that auditability matters as much as the physics. A cover you can point to, quantify, and show in an audit is worth more than a measure that exists only on paper.
Why Covex® modular HDPE rather than a single floating membrane
Large single-sheet floating membranes are difficult to install on irregular ponds, hard to repair, and vulnerable to wind uplift and ballast failure. Modular HDPE systems, interlocking units that float independently and self-arrange across the surface, offer practical advantages in a mining context:
• Irregular geometry: modules conform to ponds of any shape, including those with islands, inlets, pump barges, or fluctuating water levels.
• Level tolerance: as water rises and falls with the operation, the modular field rises and falls with it, maintaining coverage without re-tensioning or re-ballasting.
• Repairability: a damaged module is removed and replaced individually; there is no single point of failure across the whole surface.
• Chemical resistance: HDPE tolerates a wide range of pH and dissolved-metal conditions common in mining solutions, from acidic raffinate to alkaline process water.
• Logistics: modules ship compactly and are deployed by hand or with minimal equipment, which matters at remote sites far from heavy machinery and skilled installation crews.
• UV and service life: properly formulated HDPE with UV stabilization withstands years of intense high-altitude or desert solar exposure.
Where covers pay back fastest
In practice, the strongest business cases in mining tend to be process-water and raw-water reservoirs in arid climates, where evaporation losses are large and replacement water is expensive or constrained. Leach-solution ponds add the heat-retention benefit on top. And anywhere wildlife exclusion is a permit condition, the cover earns part of its keep on compliance alone. The most compelling cases stack two or three of these benefits on the same pond, water recovery plus heat retention plus wildlife exclusion, which is exactly where the economics become decisive.
Putting numbers to it
Before specifying a system, a sound evaluation models annual evaporation for the specific pond using local pan-evaporation data, applies a realistic coverage-efficiency factor based on the proposed coverage ratio, and values the recovered water at its true marginal cost, not just the pumping cost, but the cost of the next cubic meter the operation would otherwise have to secure, whether that is desalinated water, trucked water, or water bought from another rights holder. For many arid-zone mines, that marginal cost is high enough that the cover pays back in a small number of years on evaporation savings alone, with heat-retention and compliance benefits effectively free on top.
A rigorous evaluation also accounts for the operating reality of the pond: the coverage ratio actually achievable around inlets, outlets, and pump infrastructure; the wind exposure of the site; and the maintenance regime over the cover's service life. A supplier who works through these specifics with your team will give you a defensible number rather than an optimistic headline figure.
Take the next step
If you operate process ponds, leach circuits, or raw-water reservoirs and want to recover water, retain heat and put an auditable barrier between your solutions and the wildlife above them, learn more about how modular floating covers are applied in mining sites.























